The following are the latest printer specifications for the Voxel8 Developer's Kit Platform.
|Printing Technology||FFF, Pneumatic Direct Write|
|Build Volume||150 mm x 150 mm x 100 mm (i.e. 5.906" x 5.906" x 3.94") *|
|Layer Resolution||100 microns|
|Pause / Resume Prints||Yes|
|Build Plate||Kinematically Coupled|
|Conductive Trace Width||250 microns|
|Network Connectivity||Ethernet, WiFi|
|Supported Browsers||Chrome, Firefox|
|Materials||PLA, Conductive Silver Ink|
|Resistivity||5.00 × 10-7 Ω-m|
|Silver Ink Cure Time||5 minutes ***|
* Depends on your design and whether it is single or multi-material.
** For a self hosted version of our software, see our Enterprise option
*** After 5 minutes the ink is touchable. However, we recommend waiting for at least 10 minutes to fully work with it. The dry time to solid occurs asymptotically.
If you have more specific questions about specifications of the machine, please reach out to Voxel8 support by submitting an inquiry.